painting Myrtle BeachDrips, brush marks, as well as discolorations are the most common problems that professional house painters or even DIY homeowners have to deal with. After spending your time, effort and energy to paint your walls, it’s quite disappointing to see such mistakes. But when this happens, do you know what to do?

Sure, you can just hang a photo or move a furniture to cover these paint problems, but you can fix these problems just like professional house painters do. Below are five ways to treat paint problems.

House Paint Problems and Solutions

  1. How can you get rid of drips from paint?

To prevent drips, to begin with, see to it you do not overload your paintbrush as you repaint. However, if you still end up with paint drips, here’s what you can do.

  • With a scrape, meticulously scuff the paint leaks.
  • Sand the location up until it’s smooth.
  • Paint the location.
  1. What is the best way to remove brush marks?

Brush marks typically turn up on all-natural wood surfaces. They could also be triggered by overloading your paintbrush or utilizing inadequate paint strategies. Eliminate brush marks with these steps:

  • Sand the area with an equipment sander.
  • Paint the location.
  1. Do you know the best ways to eliminate a spot on your painted wall surface?

Sometimes, discolorations happen when you do not properly prime your wall before painting. As soon as you see the spot, it will be too hard to ignore. The good news is, taking care of the issue is not really tough:

  • Using trisodium phosphate, clean the area extensively.
  • Allow it to completely dry.
  • Use an oil-based undercoat over the discoloration.
  • When the undercoat is completely dry, paint.
  1. Just what to do with flaking paint?

Flaking paint takes place gradually as humidity or moisture finds its way under the painted wall surface. Take care of flaking paint by doing these steps:

  • Make use of a paint scraper or cord brush to get rid of the flaking paint.
  • Sand the surface area with a course abrasive first followed by fine abrasive
  • Strive to smooth the sides in between the repainted and scuffed locations. Or else, the brand-new layer of paint will highlight those lines.
  • Prime the area then paint
  1. How to remove mold on painted walls?

Usually, molds are found in bathrooms and in the kitchen since wetness and moisture are constant in these areas. If you experience this in your painted walls, do these:

  • Using safety eye-wear, gloves, as well as garments, clean the area with TSP, water, bleach, and also a rigid brush. Review the TSP tag for safety and security preventative measures, and also know that TSP could harm the wood finish and metal.
  • Go from bottom to top so you do not tarnish the surface area.
  • Allow the wall surface to completely dry for at the least 2 days.
  • Use primer with mildew protection.
  • Apply two coats of paint.

The secret to a successful paint job according to house paint professionals is appropriate priming.

To find out more about how to paint the right way, call or visit MBHS Painting Services.


MBHS Painting Services
Myrtle Beach, SC 29577

Cities Served
Conway, Loris, Myrtle Beach, North Myrtle Beach, Atlantic Beach, Briarcliffe Acres, Surfside Beach, Bucksport, Forestbrook, Garden City, Little River, Ayor, Socastee, Carolina Forest, Cherry Grove, Cool Spring, Fantasy Harbour, Gallivants Ferry, Green Sea, Longs, Pine Island, Springmaid Beach

Be Sociable, Share!